« Previous »
Next
https://crunchcaraudio.com/pd1500-1/
Details
Description
Crunch POWER DRIVE with QTD Technology delivers huge power in a cool running efficient heatsink. Features include built-in electronic crossovers in this 1500 watt mono subwoofer car audio amplifier, includes bass remote.
Crunch POWER DRIVE with QTD Technology delivers huge power in a cool running efficient heatsink. Features include built-in electronic crossovers in this 1500 watt mono subwoofer car audio amplifier, includes bass remote.
Category: Power Drive
SKU: 806576225102
Part #: PD1500.1
Specifications
SKU: 806576225102
Part #: PD1500.1
Specifications
- Class
Class A/B - Variable Voltage
.2 to 6V - Signal to Noise
> 98dB - Frequency Response
20Hz-250Hz - Crossover Type
Variable Electronic 12dB Per Octave - High Pass Crossover:
12dB Per Octave:
N/A - Low Pass Crossover:
12dB Per Octave:
40Hz-300Hz - Tone Control
Built-in bass control - Bass Boost
0-12dB - Subsonic Filter
10-40Hz - Power Output @ 1 Ohm:
N/A - Power Output @ 2 Ohms:
1 x 1500W - Power Output @ 4 Ohms
1 x 750W - Mono Bridged @ 4-Ohms
N/A - Total Channels
1 - Audio Inputs:
Unbalanced Inputs (RCA) - Audio Outputs:
Line Output (RCA) - Power Terminal:
12v/GND
4 ga - Speaker Terminal Wire Gauge
10 ga - Fusing
40A x 2 - Dimensions
17 x 11.5 x 3.8 in
43.1 x 29.2 x 9.6 cm - Weight
8.1 lbs (3.6 kg)
Features & Benefits
- Pre-Amp Circuitry Low Noise PreAmplifier Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- Inputs Low voltage RCA Inputs Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
- High Level Inputs Yes Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power
- Operation Mode 1 Mono Only
- Crossover / Signal Shaping Versa-Cross Electronic Crossover Fully Adjustable 12dB Crossovers
- Equalizer Electronic Fully Adjustable 12dB Crossovers
- Class / Topology Class A/B High sound quality circuit that allows POWER DRIVE to develop high levels of power with minimal distortion
- Output Devices Technology SPEED-FET Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
- Heat Sink QTD Technology Aluminum Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
- Power Supply PWM Power Supply High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
- Bass Remote Included Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
- Output Connections Nickel Plated Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
- Connections Type Screw Down Connectors Easy access for hand tool allowing a quick and secure connection
- Signal Pass Through YES - Full Range Allows additional amplifiers to be run from the "output" RCA connections which will minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
- Diagnostics LED System Protection Circuitry Monitor overload and speaker short protection with lighted indicators on the amplifier end panel