« Previous »
Next
https://crunchcaraudio.com/px2000-1d/
Details
Description
Crunch POWERX Technology delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. Crunch POWERX 2000 watt mono subwoofer car audio amplifier
Crunch POWERX Technology delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. Crunch POWERX 2000 watt mono subwoofer car audio amplifier
Category: Power X
SKU: 806576225355
Part #: PX 2000.1D
Specifications
SKU: 806576225355
Part #: PX 2000.1D
Specifications
- Class
Class D - Variable Voltage
11-15VDC - Signal to Noise
>98dB - Frequency Response
20Hz-250Hz - Crossover Type
Variable Electronic 12dB Per Octave - Low Pass Crossover:
12dB Per Octave:
30Hz-250Hz - Tone Control
Built-in bass control - Bass Boost
Switched 0-6-12dB - Subsonic Filter
20-50Hz - Phase Shift
0-180 Degrees - Power Output @ 1 Ohm:
1 x 2000W - Power Output @ 2 Ohms:
1 x 1000W - Power Output @ 4 Ohms
1 x 500W - Mono Bridged @ 4-Ohms
N/A - Total Channels
1 - Audio Inputs:
Unbalanced Inputs (RCA) - Audio Outputs:
Line Output (RCA) - Power Terminal:
12v/GND
4 ga - Speaker Terminal Wire Gauge
8 ga - Fusing
40A x 2 - Dimensions
13.3 x 10.8 x 3.7 in
33.7 x 27.4 x 9.3 cm - Weight
6.3 lbs (2.8 kg)
Features & Benefits
- Pre-Amp Circuitry Low Noise PreAmplifier Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
- Inputs Low voltage RCA Inputs Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path
- Operation Mode 1 Mono Only
- Crossover / Signal Shaping Versa-Cross Electronic Crossover Fully Adjustable 12dB Crossovers
- Equalizer Electronic Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers.
- Class / Topology Class D Very efficient D-Class to drive additional power to subwoofer frequencies while remaining a small footprint
- Output Devices Technology SPEED-FET Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
- Heat Sink QTD Technology Aluminum Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
- Power Supply PWM Power Supply High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system
- Bass Remote Included Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
- Output Connections Nickel Plated Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion
- Connections Type Screw Down Connectors Easy access for hand tool allowing a quick and secure connection
- Signal Pass Through YES - Full Range Allows additional amplifiers to be run from the "output" RCA connections which will minimize the need for additional cables running the length of the vehicle. This can dramatically minimize noise.
- Diagnostics LED System Protection Circuitry Monitor overload and speaker short protection with lighted indicators on the amplifier end panel