Crunch PZ-3500.2-PRO POWERZONE 3500 Watt Amplifier 2-Channel Car Audio Amp

PZ-3520.2-PRO Amplifier

« Previous Next »
Crunch POWERZONE car audio amplifiers

More Views

Loading product images, please wait...

PZ-3520.2-PRO Amplifier

Be the first to review this product

Part#: PZ-3520.2-PRO

Details:

Crunch PZ-3500.2-PRO POWERZONE 3500 Watt Amplifier 2-Channel Car Audio Amp
$299.99

https://crunchcaraudio.com/pz-3520-2-pro/

Details

Description
Crunch POWERZONE two channel amplifier with high level inputs utilizing SPEED-FET output devices and QTD Technology produces 3500 watts of power in a stereo or bridged mono application.

Category: Powerzone - NEW
SKU: 806576227755
Part #: PZ-3520.2-PRO

Specifications
  • Class
    Class A/B
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >90dB
  • Frequency Response
    10Hz-45KHz
  • Crossover
    VeraCross
    Switchable
    FULL / LPF / HPF
  • Variable High Pass Crossover 12dB per Octave
    60Hz - 1.2kHz
  • Variable Low Pass Crossover 12dB per Octave
    30Hz - 250Hz
  • Bass Boost
    0 - 9dB
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    2 x 1750 Watts
  • Power @ 4 Ohms
    2 x 875 Watts
  • Mono Bridged @ 4 Ohms
    1 x 3500 Watts
  • Total Channels
    2
  • Audio Inputs
    RCA
  • Audio Outputs
    Full Range
    RCA
  • Speaker Terminal Wire Gauge
    Spade Connector
    Recommended
  • Fusing
    35Ax2
  • Total Harmonic Distortion (THD)
    <0.05%


Features & Benefits
  • Operation Mode
    2 channel operation mode allows either stereo or mono bridged operation
  • Crossover Type
    Variable electronic crossovers allow for complete control of the sound
  • Electronic Equalizer
    Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.

    Check specifications for specific frequencies for this amplifier
  • Class / Topology
    Class A/B high sound quality circuit that allows amplifier to develop high levels of power with minimal distortion
  • Output Device Technology
    Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
  • Heat Sink
    QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions
  • Power Supply
    Rugged MOSFET Pulse Width Modulation power supply
    Allows amplifier to product efficient power without taxing the vehicle electrical system
  • Output Connections
    Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
  • Connection Type
    Secure connection for all power, ground and speaker connections.
  • Full-Range RCA Outputs for Signal Pass Through
    Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Maxxsonics Factory Specials
Maxxsonics Factory Specials