Crunch V-Drive amplifier series features a built-in LED VU-Meter for adjusting gain levels, Quick Thermal Dispersion Technology delivering 2125 watts to speakers, and electronic crossovers.
Weight | 2.93 lbs |
---|---|
Dimensions | 8.07 × 7 × 3.23 in |
Item Weight (lbs) | 2.46 |
Item Length (in) | 6.06 |
Item Width (in) | 5.83 |
Item Height (in) | 2.2 |
Type | Amplifier |
Brand | Crunch |
Series | V-DRIVE |
Category | Mobile |
Condition | New |
Color | Black |
Warranty | 1 Year |
Compatible Vehicles | Universal |
Amp Class | Class D |
Amp Total Channels | 2 |
Amp Max Power (watts) | 2125 |
Amp Power @ 2 Ohms (ch x watts) | 2 x 1060 |
Amp Power @ 4 Ohms (ch x watts) | 2 x 530 |
Amp Mono Bridged @ 4 Ohms (ch x watts) | 1 x 2125 |
Amp Crossover | Variable Electronic 12dB Per Octave |
Amp Variable High Pass Crossover 12dB per Octave | 40Hz-400Hz |
Amp Variable Low Pass Crossover 12dB per Octave | 40Hz-400Hz |
Amp Variable Voltage | 0.2-6V |
Amp Signal to Noise | >100dB |
Amp Frequency Response | 20Hz-20kHz |
Amp Total Harmonic Distortion (THD) | < 0.5% |
Amp Speaker Level Audio Inputs | RCA |
Amp Power Terminal 12v/GND | 4 AWG |
Amp Speaker Terminal Wire Gauge | 8 GA |
Amp Fusing | External 100A |
Proposition 65 Notice | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Low Noise Preamplifier Circuit | Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process. |
---|---|
RCA Inputs | Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path. |
Operation Mode | Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously |
Crossover Type | Fully Adjustable 12dB Crossovers |
Electronic Equalizer | Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. |
Class / Topology | Class D: Very efficient Class D design to drive additional power to speaker frequencies while remaining a small footprint |
Output Device Technology | Proprietary Crunch SPEED-FET MOSFET components maximize the amplifier's power efficiency while improving sound quality and minimizing distortion. |
Heat Sink | QTD Technology Aluminum: Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening. |
Power Supply | Pulse Width Modulated(PWM) Power Supply delivers power with minimal impact on the vehicle's electrical system. |
Output Connections | Nickel-plated brass connection terminals allow for a secure connection while resisting corrosion. |
Connection Type | Screw Down Connectors: Easy access for hand tool allowing a quick and secure connection. |
LED System Protection Circuitry Diagnostics | Monitor overload and speaker short protection with the lighted indicator on the amplifier end panel. |
Additional Features | Selectable Logo Illumination Modes: Switch between full constant red LED lights, VU Meter mode, or full off. When switched to VU Meter mode, the amplifier's logo reflects the audio level, making it useful for gain adjustment and creating a cool lighting effect. |
View/Download (5.8 MB) | Crunch V-DRIVE Amplifiers (DR) Quick Start Guide (Rev1) |
---|