POWERZONE four channel amplifier highlighted with bright Crunch red heatsink elements feature high level inputs utilizing SPEED-FET output devices and QTD Technology produces 4000 watts of power in a four channel application.
|Amp Total Channels||
|Amp Max Power (watts)||
|Amp Power @ 2 Ohms (ch x watts)||
4 x 1000
|Amp Power @ 4 Ohms (ch x watts)||
4 x 500
|Amp Mono Bridged @ 4 Ohms (ch x watts)||
2 x 2000
FULL/LPF/HPF, Switchable, VeraCross
|Amp Variable High Pass Crossover 12dB per Octave||
CH1 & CH2: Switchable HPF 60Hz-1.2kHz, CH3 & CH4: Switchable HPF 60Hz-1.2kHz
|Amp Variable Low Pass Crossover 12dB per Octave||
CH1 & CH2: Switchable LPF 30Hz-250Hz, CH3 & CH4: Switchable LPF 30Hz-250Hz
|Amp Bass Boost||
|Amp Variable Voltage||
|Amp Signal to Noise||
|Amp Frequency Response||
|Amp Total Harmonic Distortion (THD)||
|Amp Speaker Level Audio Inputs||
|Pre-amp Audio Outputs||
Full Range, RCA
|Amp Speaker Terminal Wire Gauge||
Recommended, Spade Connector
40A x 2
|Proposition 65 Notice||WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov|
|High Level Inputs|
High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included.
2CH/4CH switch. 4 channel operation mode allows either stereo or mono bridged operation.
Variable electronic crossovers allow for complete control of the sound.
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
|Class / Topology|
Class A/B high sound quality circuit that allows amplifier to develop high levels of power with minimal distortion.
|Output Device Technology|
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion.
QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions.
Rugged MOSFET Pulse Width Modulation power supply. Allows amplifier to product efficient power without taxing the vehicle electrical system.
Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion.
Secure connection for all power, ground and speaker connections.
|Full-Range RCA Outputs for Signal Pass Through|
Daisy chain multiple amplifier to eliminate additional signal cables from the source unit.
|LED System Protection Circuitry Diagnostics|
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
|Bass Remote Included|
Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.