Crunch 4×6 Inch 2 way 250 watt speaker utilizing Neo Mylar Soft Dome Tweeters and Silver Alpha-Cellulose Poly Cones.
|Speaker RMS Power Handling (watts)||
|Speaker Peak Power Handling (watts)||
|Speaker Impedance (ohms)||
|Speaker Crossover Slope||
|Speaker Mounting Diameter / Cut Out (in)||
5.5 x 3.46
|Speaker Outside Diameter (in)||
5.94 x 3.84
|Speaker Mounting Depth / Chassis Depth (in)||
|Speaker Size (in)||
4 x 6
|Proposition 65 Notice||WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov|
1 inch: Clear highs while handling plenty of power without sound harsh.
Silver Alpha-Cellulose Poly Cones: Produces musical midrange and bass tones while remaining light weight.
|Surround / Cone Coupling|
UV Resistant Rubber Surround: Moisture Resistant Rubber Surround with high Mid-Bass Impact. High Temperature Adhesive: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather.
Textured ABS: Assures a ridged linear seal to the mounting surface.
|Voice Coil / Former Assembly|
Pure Copper: Creates strong magnetic field with a very thin extrusion. Kapton: Lightweight and efficiently dissipates heat.
Epoxy infused Natural Fiber: Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process.
Over-Coil: Air is exchanged over the voice coil through the spider.
Passive Butterworth: Smooth transition of frequencies from midrange/midbass to the tweeter element. 6dB Internal: Integrated into the design to assure smooth midrange to tweeter frequency transitions.
Neo-Mylar Soft Dome Tweeter: Impact Resistant Tweeter Elements. Great sound quality and increased reliability. Kapton: Lightweight and efficiently dissipates heat.
Anti-Resonant Stamped Steel Basket: Very strong with minimal harmonics or distortions from flex or ringing.
Ferrite Magnet: Creates a strong magnetic field while remaining small enough to fit nearly every application.
Use spade connectors or solder direct for the best connection.
No. These speakers are typically installed behind an OEM panel.